Skip to content

Follow us!

Get in touch with us

Labocosmetica - PERFECTA SIO2 - Ceramic Quick Detailer

Unit price  per 
Labocosmetica - PERFECTA SIO2 - Ceramic Quick Detailer


The presence of siloxane polymers SiO2 and TiO2 enables it to leave surfaces with an unmistakable vitreo gloss that enhances the lines of your car, and an incredible cleaning action that holds off dirt, water and UV rays, creating a protective shield and keeping your vehicle cleaner for longer.

The presence of TiO2 (titanium dioxide) guarantees greater resistance, particularly against water marks and acid rain, and creates and anti-static, self-cleaning barrier making it harder for dust to build up. It is guaranteed to last up to three washes with a neutral shampoo.

#PERFÈCTA contains SiO2 , making it the perfect choice for post-coating maintenance. It maintains and prolongs the beading and sheeting hydrophobic performance of previously applied sealants and nano-coatings. It can be used as a quick detailer to improve the shine of paintwork and remove light dirt or as a ceramic spray when you need to increase both gloss and hydrophobic performance.

Ideal as "topper” for any type of protective coating, traditional waxes, sealants such as #CUPÌDO 2.0, SiO2 base coatings and other coatings. It offers outstanding water-repellent properties and duration, superior to traditional, standard quick detailers. It provides a high level of resistance to chemical agents and lasts longer than any other quick detailer.



Wash the car thoroughly and remove any iron or other build-up using our product #SIDERO.

Step 1:

Shake bottle well. Treat wet or dry paintwork, covering a maximum area of half a metre at a time.

Step 2:

On a dry car. Spray it or dispensing it on a short-hair microfiber cloth and then spread it over the area to be treated, then make a finishing pass with a clean, dry, long-hair microfiber cloth.

The second option is to spray it directly on the bodywork and spread it with a short-hair microfiber cloth, without pressing too hard, finishing by drying with a clean and dry, long-hair microfiber cloth.

Step 2:

On a wet car. Spray directly on the paintwork and spread with a “SUPER DRYER” microfiber cloth. Two or three sprays per area are enough. Use no more than two sprays on small areas.

Step 3:

Polishing. Use a clean, high-quality microfiber cloth and polish to a high-mirror finish before moving to the next area of the paintwork. Use more than one cloth if necessary. A second layer can be applied, but you must wait 24 hours. Full product curing takes 12 hours.

Do not use in direct sunlight or on warm paintwork. For best results, do not apply with temperatures above 25°C. The product can be used on wet surfaces, but for best results it should be applied on a dry surface.



P102 Keep out of reach of children.

H319 Causes serious eye irritation.

P280 Wear eye protection / face protection.

P305 + P351 + P338 IN CASE OF EYE CONTACT: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.

P337 + P313 If eye irritation persists, consult a doctor.



Didn't find your answer?

Our customer service will be happy to help you.